Membrane Filter That Cleans Polluted Drinking Water Developed

ETH student Jeremy Nussbaumer teamed up with researchers led by Wendelin Stark, from the Functional Materials Laboratory, in developing the prototype of a membrane filter.

ETH student Jeremy Nussbaumer teamed up with researchers led by Wendelin Stark, from the Functional Materials Laboratory, in developing the prototype of a membrane filter that can provide clean water for millions of people around the world.

"What makes our DrinkPure filter unique is that you can screw it on to virtually any plastic bottle. It doesn't require a pump or a reservoir, so it's very easy to use," explains the student from the canton of Aargau. "You simply screw the filter onto a bottle containing polluted water, then you can put it straight in your mouth and take a drink." Weighing less than 100 grams, DrinkPure is considerably lighter than most other filters, and the flow pressure is so high that you can purify as much as a litre of water in a minute just by squeezing the bottle with your hand. Another benefit is that the unit is less expensive and easier to manufacture than most conventional filters. These qualities, says Nussbaumer, make the filter ideal for development aid projects.

About Water Borne Diseases
Waterborne diseases are communicable diseases caused by diseases causing microorganisms in contaminated water. It is more prevalent during floods and in tsunami affected areas.

Three-Stage Filter System With Special Membrane

Three filtering stages make DrinkPure one of the most reliable devices currently on the market. First, a pre-filter captures large particles such as sand and plant fragments; the second stage consists of an activated charcoal powder that primarily removes undesirable odours and chemical contaminants; the third and most important part of the filter is a polymer membrane that removes bacteria. In fact, this membrane does its job more reliably than virtually any other water filter intended for outdoor use.

Two ETH doctoral students developed this polymer membrane and patented it three years ago. It is based on a new manufacturing process that shows great potential. It has been used in a wide range of other applications since then – for example, in a non-toxic outdoor jacket (as reported in ETH News) and its use as a battery separator is also being investigated.

First Filters to Africa Next January

A year ago, Nussbaumer learned of the project to further develop this membrane for use in a water filter. The mechanical engineering student was so enthusiastic about the idea that after completing his bachelor's degree, he decided to postpone his master's degree for a year in order to devote himself to this project. "I was really looking forward to finally being able to do something tangible and useful. Of course, we hoped that the membrane would prove suitable for a water filter, but we never expected such excellent test results," says Nussbaumer proudly.

Water - Nutrient that Beats the Heat | Summer Nutrient-Water
Dehydration, acidity, loss of energy are common problems that often occur due to insufficient water consumption, especially in summer.

In order that the research team can manufacture enough filters to use in developing countries, they are looking for financial support. They will use the proceeds to purchase the tools they need to manufacture the filters. "As for what is left over, we will use 80% to produce the filter and transport it to Africa and 20% to further develop the concept," says Nussbaumer. They expect to have the first filters completed in January 2015; they will be sent to project supporters and to Africa for use in a test phase.

Perfect for Travellers and Walkers

It is still not certain whether DrinkPure will be available in future in retail stores. Alongside its suitability for development aid, the device is also perfect for travellers and walkers. "Quickly screw it on a bottle and you can take a drink from any pond or river without a second thought," explains Nussbaumer. "I'm actually not a serious walker myself, but if I were to go I would be sure to take the filter along."

Crowdfunding The project is presented by the young research team on the Indiegogo platform. Investors can support the project with an amount ranging from 5 to 5,000 US dollars. Depending on the contribution, a donor can expect various perks, such as a thank-you video from the project leader. With a contribution of 89 dollars, a backer receives a filter and for 500 dollars, 10 units will be sent to Africa. Anyone can support the project until 20 August 2014 via the following link: http://www.indiegogo.com

Source-Eurekalert