HDPE Blow Molding and Injection Molding Containers Market to Reach US$ 57,600.7 Mn by 2026 - Persistence Market Research

Monday, April 23, 2018 Research News
Email Print This Page Comment bookmark
Font : A-A+

NEW YORK, April 23, 2018 /PRNewswire/ --

Recycling Feature of HDPE Blow Molding and Injection

Molding Containers to Boost Product Demand in the Near Future

Persistence Market Research (PMR) has published a new research report on HDPE blow molding and injection molding containers. The report has been titled "HDPE Blow Molding and Injection Molding Containers Market: Global Industry Analysis 2013-2017 and Fore

cast 2018-2026."

     (Logo: https://mma.prnewswire.com/media/661339/Persistence_Market_Research.jpg )

The proliferating demand for HDPE blow molding and injection molding containers is largely from the beverage, chemical & petrochemicals, and pharmaceuticals industries, owing to the barrier properties of HDPE and convenience in adoption along with multi-usability in comparison to its counterparts such as glass and metal.

The core end-use industries targeted by manufacturers are the beverage industry and the chemical and petrochemicals industry. Both industries are projected to collectively hold approximately half of the global market share during the forecast period. HDPE containers are widely used in the beverage industry for the packaging of beverages in bottles. Germany and China are expected to be the key manufacturing countries in the HDPE blow molding and injection molding container market.

HDPE Blow Molding and Injection Molding Containers Market Research Report Overview @ https://www.persistencemarketresearch.com/market-research/hdpe-blow-molding-and-injection-molding-containers-market.asp

The leading players operating in the global HDPE blow molding and injection molding container market are Greif, Inc., Mauser Group B.V., SCHÜTZ GmbH & Co. KGaA, Time Technoplast Ltd., Duplas Al Sharq LLC, Mold Tek Packaging Ltd., and Takween Advanced Industries, among others.

According to the report, the global HDPE blow molding and injection molding container market is anticipated to witness a CAGR of 5.3% from 2018 to 2026. The global HDPE blow molding and injection molding container market was worth US$ 36,438.3 Mn in 2017 and is forecasted to be valued at US$ 57,600.7 Mn by 2026 end.

Request Sample Report @ https://www.persistencemarketresearch.com/samples/22735

Growing Consumer Convenience to Trigger High Product Demand 

The global packaging industry has experienced noteworthy alteration in the last couple of decades. HDPE containers provide substantial lightweight advantages over containers made from other plastics. Moreover, HDPE containers are rigid and tough, and protect the content from chemicals and ultraviolet rays. HDPE is also less prone to puncture than its counterpart LDPE. The property of being lightweight yet with an ability to provide high strength is what ensures a higher preference for HDPE containers in the global market.

For instance, a lightweight HDPE container weighing around 2 ounces has the ability to handle the weight of 1 gallon of the product stored. The aforesaid properties provide HDPE with significant edge over other plastics in terms of consumer and market acceptance.

To add to this, being strong and lightweight at the same time also contributes to a more sustainable packaging solution, which holds as much importance as the associated consumer convenience. The high sustainability factor is also anticipated to contribute considerably to the growth of the global HDPE injection molding and blow molding container market.

Download and View Report TOC, Figures and Tables @ https://www.persistencemarketresearch.com/market-research/hdpe-blow-molding-and-injection-molding-containers-market/toc

Barriers to Market Revenue Growth 

HDPE - though more rigid than LDPE - has a poor gas barrier. There are certain reasons due to which HDPE might not be preferred for packaging. HDPE material is a low surface energy plastic, which makes it hard to bond. The surface either has to be treated with plasma, or a special adhesive has to be used, and these have to be procured as extra material. Due to high density, the structure of HDPE is more linear and therefore is crystalline.

In addition, HDPE is flammable, can crack under stress, and has poor weathering resistance. The global market is also highly influenced by oil prices, which have an uncertain fluctuation curve. These factors are likely to restrict revenue growth of the global HDPE blow molding and injection molding container market.

Get full Report Now https://www.persistencemarketresearch.com/checkout/22735

Persistence Market Research Overview

Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.

To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.

Contact Persistence Market Research U.S. Sales Office: 305 Broadway, 7th Floor New York City, NY 10007 +1-646-568-7751 United States USA - Canada Toll-Free: 800-961-0353 Email: sales@persistencemarketresearch.com

PMR Latest News:https://www.persistencemarketresearch.com/news

SOURCE Persistence Market Research Pvt. Ltd.

Advertisement


Post your Comments

Comments should be on the topic and should not be abusive. The editorial team reserves the right to review and moderate the comments posted on the site.
* Your comment can be maximum of 2500 characters
I agree to the terms and conditions

News A - Z

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

News Search

Medindia Newsletters

Subscribe to our Free Newsletters!

Terms & Conditions and Privacy Policy.

Find a Doctor

Press Release Category

Press Release Archive

Stay Connected

  • Available on the Android Market
  • Available on the App Store