Scientists Develop Eco Friendly Lubricating Grease

by Aruna on  July 14, 2009 at 10:49 AM Environmental Health   - G J E 4
Scientists Develop Eco Friendly Lubricating Grease
University of Huelva, Spain, scientist team has developed eco friendly lubricating grease based on ricin oil and cellulose derivatives.

The new formula does not include any of the contaminating components used to manufacture traditional industrial lubricants.

"The objective of this research was to develop a product that could be used as a lubricating grease but that was made only from natural materials and was therefore 100 percent biodegradable", said Jose Maria Franco, a chemical engineer at the University of Huelva and co-author of the study.

Environmentally friendly greases are "oleogels" that use cellulose derivatives from plants and ricin oil as a lubricant base.

According to Franco, these new formulations are an alternative to traditional lubricating greases, which create pollution that is difficult to combat once discharged into the environment.

Lubricants used in industry are made from non-biodegradable components, such as synthetic oils or petroleum derivatives, and thickeners made with metallic soaps or polyurea derivatives (a family of synthetic polymers).

These are currently the best performers, but they also imply more problems from an environmental perspective.

Millions of tonnes of hydraulic and industrial oils, and others from machinery are discharged each year into rivers, the sea and fields.

Mineral-based oils can contaminate groundwater for more than 100 years, and can prevent the growth of trees and prove toxic to aquatic life.

Only partial solutions have been found to date for this problem, such as substituting mineral oil for vegetable ones, but no alternatives had been found to the metallic thickeners, which are also highly polluting.

The new green grease provides an answer, although the scientists admit, "more research is needed" in order to perfect it's lubricating and anti-wear performance.

Franco said that the new material "has a similar level of mechanical stability to that of traditional greases, and it is highly temperature resistant, with rheological properties (viscosity) that do not change greatly, although we have observed that the material is expelled in large quantities when subjected to large inertial forces at high temperatures."

When this substance is used in bearings, it is important that it is not easily shed.

This will reduce the lubrication frequency, thus maintaining the ideal functioning conditions for machinery for a longer time.

The researchers will continue to investigate this aspect in order to find a way of balancing the use of biodegradable ingredients to manufacture the grease while also optimizing its lubricating capacity.

Source: ANI

Post your Comments

Comments should be on the topic and should not be abusive. The editorial team reserves the right to review and moderate the comments posted on the site.
User Avatar
* Your comment can be maximum of 2500 characters
Notify me when reply is posted I agree to the terms and conditions

You May Also Like

View All