Medindia

X

Health-Hazardous Particles Emitted By Common Laser Printers

by Tanya Thomas on  February 14, 2009 at 5:01 PM Research News   - G J E 4
 Health-Hazardous Particles Emitted By Common Laser Printers
Queensland University of Technology researchers have discovered the identity and origin of tiny yet potentially hazardous particles emitted by the laser printers that we use so often.
Advertisement

Professor Lidia Morawska from QUT's International Laboratory for Air Quality and Health conducted the study to find the answer of questions raised by earlier findings that almost one third of popular laser printers emitted large numbers of ultrafine particles.

Advertisement
These tiny particles are potentially dangerous to human health because they can penetrate deep into the lungs.

Morawska said the latest study found that the ultrafine particles formed from vapours, which are produced when the printed image is fused to the paper.

"In the printing process, toner is melted and when it is hot, certain compounds evaporate and those vapours then nucleate or condense in the air, forming ultrafine particles," Morawska said.

"The material is the result of the condensation of organic compounds which originate from both the paper and hot toner," Morawska added.

In the study, the researchers compared a high-emitting printer with a low-emitting printer and found that there were two ways in which printers contributed to the formation of these particles.

"The hotter the printer gets, the higher the likelihood of these particles forming, but the rate of change of the temperature also contributes," Morawska said.

"The high emitting printer operated at a lower average temperature, but had rapid changes in temperature, which resulted in more condensable vapour being emitted from the printer.

"The printer with better temperature control emitted fewer particles," Morawska added.

Morawska said this study provided information, which would help consumers better understand the risks of laser printers and would help the printer industry to design low or no emission printers.

Source: ANI
TAN/L
Advertisement

Post your Comments

Comments should be on the topic and should not be abusive. The editorial team reserves the right to review and moderate the comments posted on the site.
User Avatar
* Your comment can be maximum of 2500 characters
Notify me when reply is posted I agree to the terms and conditions

You May Also Like

Advertisement
View All